Results in Engineering

Scope & Guideline

Elevating Research Standards in Engineering Excellence

Introduction

Welcome to the Results in Engineering information hub, where our guidelines provide a wealth of knowledge about the journal’s focus and academic contributions. This page includes an extensive look at the aims and scope of Results in Engineering, highlighting trending and emerging areas of study. We also examine declining topics to offer insight into academic interest shifts. Our curated list of highly cited topics and recent publications is part of our effort to guide scholars, using these guidelines to stay ahead in their research endeavors.
LanguageEnglish
ISSN2590-1230
PublisherELSEVIER
Support Open AccessYes
CountryNetherlands
TypeJournal
Convergefrom 2019 to 2024
AbbreviationRESULTS ENG / Results Eng.
Frequency4 issues/year
Time To First Decision-
Time To Acceptance-
Acceptance Rate-
Home Page-
AddressRADARWEG 29, 1043 NX AMSTERDAM, NETHERLANDS

Aims and Scopes

The journal 'Results in Engineering' focuses on disseminating innovative research findings across various engineering disciplines, emphasizing practical applications and sustainability. Its core areas encompass advanced engineering techniques, materials science, environmental engineering, and energy systems, reflecting a commitment to addressing contemporary challenges in engineering practice.
  1. Advanced Engineering Techniques:
    Research on novel methodologies and technologies that enhance engineering practices, including optimization algorithms, simulation techniques, and control systems.
  2. Materials Science and Engineering:
    Investigations into the properties, processing, and applications of new materials, including composites, nanomaterials, and sustainable materials.
  3. Environmental Engineering:
    Studies focused on sustainable practices, pollution mitigation, and the development of eco-friendly technologies for waste management and resource recovery.
  4. Energy Systems and Sustainability:
    Research on renewable energy technologies, energy efficiency, and the integration of sustainable practices in energy systems, including solar, wind, and bioenergy.
  5. Computational Modeling and Simulation:
    Utilization of advanced computational methods for modeling complex engineering systems and processes, aiding in design optimization and performance evaluation.
Recent trends in 'Results in Engineering' highlight the journal's responsiveness to contemporary engineering challenges. The following themes have emerged prominently in recent publications, reflecting a focus on sustainability, advanced technologies, and interdisciplinary approaches.
  1. Sustainable Engineering Practices:
    Research focusing on sustainability in engineering, including green technologies, waste-to-energy solutions, and the development of environmentally friendly materials.
  2. Smart Technologies and IoT Integration:
    A growing emphasis on the integration of smart technologies and the Internet of Things (IoT) in engineering applications, enhancing systems' efficiency and interactivity.
  3. Advanced Energy Solutions:
    Emerging studies on innovative energy solutions, particularly those related to hydrogen production, energy storage, and smart grid technologies, reflecting a shift towards sustainable energy systems.
  4. Machine Learning and AI Applications:
    Increasing incorporation of machine learning and artificial intelligence in engineering research, particularly for predictive modeling, optimization, and data analysis across various engineering fields.
  5. Resilience Engineering:
    A notable focus on resilience and adaptability in engineering systems, particularly in the context of climate change, natural disasters, and infrastructure robustness.

Declining or Waning

While 'Results in Engineering' continues to evolve, certain themes have seen a decline in prominence, indicating a shift in research focus or reduced interest in specific areas. The following themes appear to be waning based on recent publications.
  1. Traditional Manufacturing Processes:
    Research on conventional manufacturing techniques has decreased as attention shifts towards additive manufacturing and advanced materials, reflecting the industry's move towards innovative production methods.
  2. Basic Material Testing:
    There is a noticeable reduction in studies focusing solely on basic mechanical testing of materials, as more complex interactions and applications take precedence in research.
  3. Local Environmental Studies:
    Publications centered on localized environmental assessments are becoming less frequent, possibly due to a growing emphasis on broader, multi-regional studies that address global environmental challenges.
  4. Standardized Engineering Solutions:
    The focus on standardized solutions for engineering problems appears to be declining as the field increasingly values tailored, context-specific approaches that address unique challenges.
  5. Theoretical Frameworks Without Application:
    Research that presents purely theoretical frameworks without practical applications or case studies is waning, as the journal emphasizes results that contribute to real-world engineering problems.

Similar Journals

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY

Transforming Ideas into Energy Solutions
Publisher: SAGE PUBLICATIONS LTDISSN: 0957-6509Frequency: 8 issues/year

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, published by SAGE PUBLICATIONS LTD, is a pivotal journal dedicated to advancing the fields of mechanical engineering and energy technology. With a history spanning from 1983 to 2024, this journal provides a respected platform for researchers and practitioners to disseminate findings that address contemporary challenges in power generation, energy efficiency, and sustainable engineering practices. As evidenced by its quarter ranking in Q3 within the categories of Energy Engineering and Power Technology, and Mechanical Engineering, it serves as a significant resource for academics aiming to enhance their understanding and explore innovation in these critical areas. While currently not an open-access journal, the research published here is invaluable for both ongoing education and professional practice, making it an essential read for anyone engaged in the engineering disciplines.

Engineering Technology & Applied Science Research

Pioneering Research for Tomorrow's Technologies
Publisher: EOS ASSOCISSN: 2241-4487Frequency: 6 issues/year

Engineering Technology & Applied Science Research is a distinguished open-access journal published by EOS ASSOC based in Greece, focusing on the multifaceted realms of engineering, materials science, and signal processing. Established in 2011, this journal has rapidly gained recognition, achieving a Q2 ranking in Engineering (miscellaneous) and a Q3 ranking in both Materials Science and Signal Processing for 2023, showcasing its growing impact in these critical fields. With an emphasis on disseminating high-quality research and fostering innovation, ETASR provides a platform for researchers, professionals, and students to share their findings and explore emerging technologies. The journal's Scopus rankings further reinforce its significance, positioning it strongly within the top percentiles among its peers. With a commitment to open access, ETASR ensures that research is accessible to a global audience, promoting collaboration and knowledge sharing across disciplines. Whether you are a seasoned researcher or a budding student, ETASR is an invaluable resource for advancing your understanding and contributing to the cutting-edge developments in engineering and applied sciences.

Chemical Industry & Chemical Engineering Quarterly

Connecting Scholars and Professionals in Chemical Innovation.
Publisher: ASSOC CHEMICAL ENGISSN: 1451-9372Frequency: 4 issues/year

Chemical Industry & Chemical Engineering Quarterly is a distinguished, open-access journal published by ASSOC CHEMICAL ENG that serves as a vital platform for innovative research within the field of chemical engineering. Established in 2000 and actively disseminating knowledge since then, this journal has garnered acknowledgment for its contribution to the field, currently being ranked in the third quartile (Q3) of Chemical Engineering (Miscellaneous) for 2023. With a focus on advancing understanding of chemical processes and facilitating the integration of industry operations with engineering principles, it provides a forum for both theoretical and applied research. The journal is committed to maintaining high standards of academic rigor, supported by its indexed presence in Scopus, where it ranks #173 out of 273 in the general chemical engineering category. As an open-access journal, it promotes the rapid dissemination of research findings, enhancing accessibility for scholars, professionals, and students worldwide. Based in Serbia, the journal is an essential resource for those seeking to stay at the forefront of chemical engineering advancements.

CHEMICAL ENGINEERING RESEARCH & DESIGN

Advancing the Frontiers of Chemical Engineering.
Publisher: ELSEVIERISSN: 0263-8762Frequency: 12 issues/year

CHEMICAL ENGINEERING RESEARCH & DESIGN is a prestigious journal that has been at the forefront of dissemination in the fields of chemical engineering and general chemistry since its inception in 1983. Published by Elsevier, the journal features a rich array of research articles that contribute to both theoretical and practical advancements in the discipline. With an impact factor that positions it strongly within the Q2 quartile for both Chemical Engineering and Chemistry categories, it occupies an esteemed place in the academic community, being ranked #77 out of 273 in Chemical Engineering and #111 out of 408 in General Chemistry on Scopus. Researchers and professionals will find it an invaluable resource for cutting-edge research and innovative methodologies that shape the future of chemical engineering applications. While the journal does not currently offer open access, it remains accessible through institutional subscriptions, ensuring that important findings continue to reach a broad audience. With a scope that is poised to expand through 2024, the journal aims to foster collaboration and knowledge sharing, supporting the continuous evolution of the field.

Applied Sciences-Basel

Connecting Ideas, Transforming Sciences
Publisher: MDPIISSN: Frequency: 24 issues/year

Applied Sciences-Basel, an interdisciplinary journal published by MDPI, serves as a prominent platform for disseminating high-quality research in the fields of engineering, materials science, computer science, and fluid dynamics. Since its inception in 2011, this open access journal, based in the heart of Switzerland, has garnered a reputation for facilitating the rapid exchange of ideas and advancements in applied sciences. With an impressive influence marked by its quarterly rankings in various categories—including Q2 in Engineering and Material Science—it is positioned well within the Scopus rankings. Researchers, professionals, and students can benefit from its extensive scope and significant impact factor, as the journal actively promotes innovative methodologies and applications that address pressing scientific challenges. The journal's commitment to open access ensures that vital research is readily available to all, fostering collaborative efforts across disciplines and geographies.

JOURNAL OF CHEMICAL ENGINEERING OF JAPAN

Fostering Collaboration for Global Scientific Progress
Publisher: TAYLOR & FRANCIS LTDISSN: 0021-9592Frequency: 12 issues/year

JOURNAL OF CHEMICAL ENGINEERING OF JAPAN is a distinguished academic publication in the field of chemical engineering and chemistry, published by Taylor & Francis Ltd. With its ISSN 0021-9592 and E-ISSN 1881-1299, this journal has been a vital resource for researchers and practitioners since its inception in 1968 and continues to provide essential insights and advancements through 2024. The journal operates under an Open Access model as of 2023, promoting wider dissemination of research findings and encouraging collaboration within the global scientific community. Currently categorized in the Q4 quartile for both Chemical Engineering and Chemistry (miscellaneous) in 2023, it ranks within the lower percentiles of its respective fields, offering a platform for emerging scholars to publish their work and gain visibility. As part of Japan's academic landscape, it addresses numerous aspects of chemical engineering, fostering innovation and technical development that contribute to the industry's growth. Engaging with this journal is paramount for those looking to stay informed on the latest research trends and applications in chemical processes.

JOURNAL OF THE CHINESE INSTITUTE OF ENGINEERS

Catalyzing academic exchange in the realm of engineering.
Publisher: TAYLOR & FRANCIS LTDISSN: 0253-3839Frequency: 7 issues/year

The Journal of the Chinese Institute of Engineers, published by Taylor & Francis Ltd, serves as a vital platform for the dissemination of innovative research in the field of engineering. Since its inception in 1978, this journal has been committed to advancing knowledge and fostering academic dialogue in general engineering and its multidisciplinary applications. With its current ranking of Q3 in the 2023 Engineering (miscellaneous) category, it is recognized within Scopus as the 139th out of 307 journals, placing it in the 54th percentile of its field. The journal facilitates access to a diverse range of high-quality articles, promoting a deeper understanding of contemporary engineering challenges. Although it does not operate on an open-access model, its insights are invaluable for researchers, professionals, and students eager to stay at the forefront of engineering advancements. Located in Oxford, England, the journal is poised to continue its influential role in shaping the future of engineering research until 2024 and beyond.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION

Driving excellence in safety management and environmental protection.
Publisher: ELSEVIERISSN: 0957-5820Frequency: 8 issues/year

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION, published by Elsevier, is a premier academic journal dedicated to advancing the fields of chemical engineering, environmental science, and safety management. With an impressive impact factor, this esteemed journal undergoes a meticulous peer-review process and serves as a vital platform for researchers, professionals, and students seeking to disseminate cutting-edge research and innovative practices. Submissions are welcome in a wide scope of topics related to safety, risk, reliability, and environmental engineering, demonstrating its influence as a Q1 journal across multiple categories, including Environmental Chemistry and Safety, Risk, Reliability and Quality. By providing a rigorous analysis of current challenges and solutions in the domain since its inception in 1990, it continues to foster interdisciplinary collaboration and practical applications in the United Kingdom and beyond. With the journal not currently offering Open Access options, subscribers gain exclusive access to pivotal insights that shape industry standards and drive advancements in sustainable practices.

Bulletin of the Polish Academy of Sciences-Technical Sciences

Unveiling Breakthroughs in Engineering and Beyond
Publisher: POLSKA AKAD NAUK, POLISH ACAD SCI, DIV IV TECHNICAL SCIENCES PASISSN: 0239-7528Frequency: 6 issues/year

Bulletin of the Polish Academy of Sciences-Technical Sciences is a distinguished peer-reviewed journal published by the Polish Academy of Sciences, focusing on a broad spectrum of disciplines within technical sciences. With an E-ISSN of 2300-1917 and an established presence since 1983, this journal transitioned to an Open Access model in 2009, ensuring wide dissemination of innovative research findings. Recognized for its contributions, the journal boasts notable rankings in various categories, including Q4 in Artificial Intelligence and Q3 in fields such as Computer Networks and Communications and Atomic and Molecular Physics, as indicated by its Scopus rankings. With its strategic location in Warsaw, Poland, and a commitment to advancing knowledge and technology, the Bulletin serves as a vital platform for researchers, professionals, and students to share and engage with cutting-edge developments in engineering and related fields. Emphasizing high-quality research, this journal offers an essential resource for anyone looking to enhance their understanding of current trends and breakthroughs in technical sciences.

Asia-Pacific Journal of Chemical Engineering

Innovating the Future of Chemical Engineering in the Asia-Pacific.
Publisher: WILEYISSN: 1932-2135Frequency: 6 issues/year

The Asia-Pacific Journal of Chemical Engineering, published by WILEY, serves as a vital forum for the dissemination of innovative research in the interdisciplinary domains of chemical engineering, renewable energy, sustainability, and waste management. Established in 2006, this esteemed journal has achieved a notable impact factor that reflects its commitment to advancing knowledge and practices within the chemical engineering community. With its Q3 category rankings across various fields, including Chemical Engineering (Miscellaneous), Renewable Energy, Sustainability and the Environment, and Waste Management and Disposal, the journal holds a significant position among its peers, assuring readers of quality and relevance in published content. Although it does not offer Open Access options, the Asia-Pacific Journal of Chemical Engineering remains an essential resource for researchers, professionals, and students aiming to stay at the forefront of innovations affecting the Asia-Pacific region and beyond. The journal's broad scope covers diverse topics, making it an integral part of the academic landscape from 2006 to 2024.